Total Pageviews

Saturday, 28 September 2013

Autumn Symphony CT 2

20:45 | Posted by | Edit Post

I designed this tag using "Autumn Symphony" scrapkit
Designed by Vickie's Scraps
This kit can be purchased at the following stores
here
and
here
Tubes used designed by Barbara Jensen
These can be purchased 
here
Check out Vickie's Scraps blog
here


Tutorial

Open paper 40
Place element 113 in the middle of the paper.
Resize to X 403.09px, Y 401.97px, W and H 291.84%.
Place element 111 on top of element 113.
Resize to X 403.46px, Y 400.32px, W and H 383.04%.
This element should now look like it is outlining element 113.
Place element 84 at the bottom left hand side of the paper.
Resize to X 82.95px, Y 629.33px, W 188.53% and H 157.30%.
Place element 8 at the right hand side of element 84.
Turn this element to a -11.53 angle.
Resize to X 118.50px, Y 590.69px, W 0.28% and H 0.34%.
Place element 179 on top of element 113
right in the middle of where the 3 frames connect.
Resize to X 350.00px, Y 480.50px, W and H 100.00%.
Place element 91 over element 179.
Resize to X 357.07px, Y 464.41px, W and H 100.00%.
Place element 85 inside element 113 
at the top left corner
Resize to X 560.99px, Y 212.14px, W and H 147.35%.
Place element 85 inside element 113
at bottom of the right corner
Resize to X 545.34, Y 533.94px, W and H 181.76%.
Place element 85 inside element 113
at bottom left hand side 
Resize to X 215.30px, Y 520.25px, W -140.93% and H 152.75%.
Place element 85 inside element 113
at top left hand side
Turn to -156.76 degree angle
Resize to X 222.21px, Y 204.50px, W 119.19% and H 129.84%.
Last but not least
Do not forget your license and to credit scrapkit designer
Thanks for using my tutorial :)

Extras











| 0 comments
Wednesday, 25 September 2013

Autumn Symphony CT 1

19:15 | Posted by | Edit Post

I designed this tag using Vickie's Scraps
"Autumn Symphony" scrapkit
This kit can be purchased at
here
and
here
Tube used designed by Barbara Jensen
This tube can be bought
here

Tutorial

Open paper 14
Place element 122 top left hand side of the paper
Resize to X 240.00px, Y 163.00px, W and H 2.24%
Place element 122 bottom right hand side of the paper
Resize to X 336.00px, Y 272.50px, W 2.24%, H -2.24% and 90 degree angle
Place element 118 in the middle of the paper
Resize to X 259.50px, Y 243.00px, W 95.91% and H 95.97%
Place element 107 behind element 118
Resize to X 252.54px, Y 252.04px, W and H 192.96%
Place element 179 infront of element 118
Resize to X 248.50px, Y 256.00px, W and H 146.70%
Place element 7 at the top right hand side of element 179
Resize to X 359.15px, Y 158.47px, W and H 0.44%
Place element 154 behind element 107, in the middle of the frame
Resize to X 258.50px, Y 197.00px, W and H 1.81%
Place element 154 behind element 107, top of the frame
Resize to X 265.00px,  129.00px, W and H 1.81%
Place element 154 behind element 107, bottom of frame
Resize to X 265.00px, Y 336.00px, W and H 1.81%
Place element 155 in front of the second element 154 we just did
Resize to  X 268.50px, Y 116.50px, W and H 1.80%
Place element 155 in front of the third element 154 we just did
Resize to X 274.00px, Y 361.00px, W and H 1.81%
Place element 155 in front of the first element 154 we just did
Resize to X 250.00px, Y 250.50px, W and H 1.81%
Place your tube infront of element 179
Voila Finished :)
Dont forget your license and to credit kit maker
Thanks for trying out my tutorial

Extras
















| 0 comments
Sunday, 22 September 2013

La Vie En Rose CT 2

19:17 | Posted by | Edit Post

I designed this tag using "La vie en rose" scrapkit
designed by Waggish Sparkles
This kit can be purchased
here
Tube used designed by Di Halim
can be purchased
here
Checkout my fb tag page
here



Tutorial

Open paper 13
Place sparkle 4 in the middle of the paper
Place frame 1 over sparkle 4
Resize to X 251.67px, Y 247.41px, W and H 13.86%
Place flower 1 at top left hand side of paper 
Turn flower down towards frame
Resize to X 130.00px, Y 105.39px, W -11.27%, H 11.27%
Place flower 1 at bottom right hand side of screen
Turn flower down towards frame
Resize to X 384.08px, Y 389.38px, W and H 14.10%
Place rose 1 top left hand side of paper right over flower 1
Resize to X 129.81px, Y 99.45px, W and H 8.01%
Place rose 1 bottom right hand side of paper right over flower 1
Reize to X 363.48px, Y 376.47px, W and H 8.50%
Place star 1 top right hand side of paper
Resize to X 395.23px, Y 61.00px, W 9.34% and -25 degree angle
Place lovely bottom left hand side of frame
Resize to X 147.84px, Y 375.50px, W and H 11.32%, 36.35 degree angle
Place tube inside frame
Last but not least do not forget your license and credits to kit owner
Thanks for using my tutorial :)

Extras











| 0 comments

La Vie En Rose CT 1

18:21 | Posted by | Edit Post

I designed this tag using "LaVieEnRose" scrapkit
designed by Waggish Sparkles
This kit can be purchased
here
Tube used designed by Verymany
can be purchased
here
Checkout my new fb tag page 
here



Tutorial

Open paper 4
Place sparkle 4 in the middle of the paper
Place heart frame 3 over sparkle 4
Resize to X 239.25px, Y 237.75px, W and H 12.67%
Place gift 3 at right hand side of the frame
Resize to X 343.59px, Y 361.42px, W and H 6.21%
Place gift 4 in front of gift 3
Resize to X 303.00px, Y 405.50px, W and H 100%
Place gift 2 beside gift 4
Resize to X 231.14px, Y 408.00px, W and H 4.41%
Place perfume on right hand side of gift 3
almost over lapping the gift
Resize to X 396.49px, Y 349.00px, W and H 7.76%
Place necklace behind gift 2
Resize to X 180.30px, Y 397.67, W and H 33.65%
Place cat 3 behind necklace
Resize to X 125.00px, Y 369.00px, W -6.14%, H 6.14%
Place tube of choice in front of frame
Click frame layer
Click magic wand tool
Click inside of frame and right click your mouse and select inverse
Now click tube layer
Erase Tool
Erase what you wish of tube until it appears she is half in and half out of the frame
Click frame layer again and deselect
Now last but not least dont forget your license and credits for kit used 
Thanks for using my tutorial :)

Extras











| 0 comments

Harvest Wish CT 1

12:41 | Posted by | Edit Post

I designed this tag using "Harvest Wish" scrapkit
designed by Kissing Kate
This kit can be purchased
here
Tube used designed by Alex Prihodko



TUTORIAL

Open paper 7 
Place element 28 in the middle of the page
Resize to X 418.61px, Y 420.60px, W 149.52%, H 149.52%
Place frame 2 on top of element 28
Resize to X 403.95px, Y 391.26px, W 201.56%, H 201.56%
This should leave you with nice size frame and some leaves from element 28 poking out under the frame
Place element 22 at bottom of left hand side of the frame
Resize to X 231.05px, Y 584.83px, W 86.07%, H 86.07%
Place element 13 in front of element 22
Resize to X 271.84px, Y 545.08px, W 33.83%, H 33.83%
Place element 23 in front of element 13
Resize to X 271.04px, Y 637.92, W 41.32%, H 41.32%
Place element 41 at the bottom of the right hand side of the frame
Resize to X 620.33px, Y 590.00px, W 80.41%, H 80.41%
Place element 30 behind element 41 and move it almost to the end of the barrel
Resize to X 644.64px, Y 486.98px, W 55.03%, H 55.03%
Now place element 48 under frame 2 
Resize to X 391.86px, Y 704.50px, W 339.96%, H 100.00%
Last but not least make sure to add in your license, recognition of the kit used 
Hope you enjoyed this tut :)

Extras








| 0 comments
Subscribe to: Posts (Atom)

Search

Followers

Blog Archive